8–Using QLogic Control Suite
Viewing Resource Information
127
83840-546-00 D
To configure resource reservations
1.
Select
Reserved Resources
for the Offload Configuration setting.
Reservations allocate the minimum number of connections per technology.
See
for the maximum number of connections available for various
configurations.
2.
Click
First Come First Served
to allow connections on a
first-come-first-served basis to any enabled offload technology (FCoE or
iSCSI) as long as resources are available. Otherwise, click
Reserved
Resources
to set the maximum number of connections for each offload
technology. This option is not available for 10 Gbps network adapters.
3.
If allocating iSCSI connections, select the
iSCSI
check box and slide the bar
or enter a number in the value box. This is the maximum number of
connections available for iSCSI offload.
4.
After the configurations are complete, click
Apply
to save the settings or
click
Reset
to revert back to the previous settings. A chart of the resource
allocations appears below the resource configurations.
5.
If prompted, reboot the system.
Table 8-1. Maximum Number of Offload Connections
Offload
First Come First
Served
Reserved
Resources
Maximum
Number of
Connections
iSCSI only
Selected
–
Between 7 and 100
iSCSI only
–
Selected
28
Summary of Contents for 8400 Series
Page 390: ......
