Qlogic 8200 Series, User Manual

Page: 94 / 130

2–Configuring NIC
NIC TroubleShooting/Diagnostics
2-48 SN0054671-00 A
4. Under Diagnostic Tests , select one or more check boxes indicating the
tests you want to run: Hardware Test , Register Test , Interrupt Test ,
Loopback Test , and Link Test . ( Windows Diagnostic Test Descriptions
describes each test type.)
5. Click Run Tests .
To run user diagnostics in the CLI:
Use QConvergeConsole CLI (
qaucli
), a unified command line utility, to manage
all QLogic adapter models, including running user diagnostics. The overall option
(
-pr <protocol>
) allows you to start the utility with a specific protocol type:
NIC, iSCSI, or Fibre Channel. If you do not specify a protocol, all protocols are
enabled by default.
Table 2-3 and Table 2-4 list the QConvergeConsole
commands for selecting a protocol.
NOTE:
Only one test can run at a time. Multiple tests can run sequentially.
Table 2-3. Windows QConvergeConsole CLI—Selecting a Protocol in
Menu Mode
Command Description
qaucli
Start QConvergeConsole CLI in interactive
mode
qaucli -pr nic [options]
Issue NIC command line options
qaucli -pr iscsi [options]
Issue iSCSI command line options
qaucli -pr fc [options]
Issue Fibre Channel and FCoE command line
options
qaucli -npar [options]
Issue NPAR command line options
Table 2-4. Windows QConvergeConsole CLI—Selecting a Protocol in
Legacy Mode
Command Description
qaucli -nic [options]
Use NIC legacy command line
netscli [options]
Use NIC legacy command line
qaucli iscsi [options]
Use iSCSI legacy command line
iscli [options]
Use iSCSI legacy command line