Qlogic 8200 Series, User Manual

Page: 91 / 130

2–Configuring NIC
NIC TroubleShooting/Diagnostics
SN0054671-00 A 2-45
 To perform a Flash test, issue the following command:
qaucli -pr nic testflash [cna_port_inst]
 To perform a hardware test, issue the following command:
qaucli -pr nic -testhw [cna_port_inst]
 To perform an interrupt test, issue the following command:
qaucli -pr nic -testinterrupt [cna_port_inst]
 To perform a link test, issue the following command:
qaucli -pr nic -testlink [cna_port_inst]
 To perform a register test, issue the following command:
qaucli -pr nic -testregister [cna_port_inst]
 To display transceiver DMI data, issue the following command:
qaucli -pr nic -trans [cna_port_inst]
Ethtool Diagnostics
To perform an adapter self-test using ethtool-based diagnostics, issue the
following command:
# ethtool -t eth<x> offline
The self-test includes the following:
 Loopback test
 Interrupt test
 Link test
 Register test
Examples:
# ethtool -t eth8 offline
The test result is PASS
The test extra info:
Register_Test_on_offline 0
Link_Test_on_offline 0
Interrupt_Test_offline 0
Loopback_Test_offline 0