56
3. Set up a WIFI connection. (EZ Mode or AP Mode)
EZ Mode
a. Turn on Wi-Fi on phone settings.
b. Tap “Add device”.(Make sure the fan is powered on and there is a red
light blinking fast in the center of the ceiling fan lampshade.)
c. Tap “Qlima smart ceiling fan” button under “Air circulation” menu. Tap
“Next”.(The default pairing mode is EZ Mode for WIFI connection)
d. Select your home WIFI and enter password, tap “Confirm”.
e. Wait for the connection to be completed, will enter the main control UI.
If you are unable to set up a WIFI connection via EZ Mode, try AP Mode and
follow the below steps.
AP Mode
a. Press and hold
button for 5 seconds.
b. Tap “Add device”.
(Make sure the fan is powered on and there is a red light blinking slowly
in the center of the ceiling fan lampshade.)
c. Tap “Qlima smart ceiling fan” button under “Air circulation” menu.
d. Tap “Net Pairing Mode”, select “AP Mode”. Tap “Next”.
e. Select your home WIFI and enter password, tap “Confirm”.
f. Connect to “Smart life” WIFI signal.
g. Reopen the APP.
h. Wait for the connection to be completed, will enter the main control UI.
4. The app will walk you through the main screen and show you how to create
schedules, change fan speeds, dim the light, switch between Summer/Winter
mode, invite users, create groups and much more. Refer to app instructions
for more details. If necessary, you can reconnect the device according to the
above steps.
FOR ADAPTER
INPUT:100-240 Va.c. 1.5A 50/60Hz OUTPUT: 24.0Vd.c 3.0A 72.0W TA:10~40ºC
TC:80ºC Ip20
CAUTION!
1. Non-inherently short-circuit proof transformer with non-self-resetting or non-
replaceable, protective device and non-replaceable intentional weak parts
shall have an information explaining the protective devices, cannot be reset
or replaced after a short-circuit or an overload;
2. For associated transformers and IP00 transformers, an informative note shall
indicate that a 10 % over or under voltage may appear in the supply and the
rated output of the transformer shall be selected accordingly;
3. The external flexible cable or cord of this transformer cannot be replaced; if
the cord is damaged, the transformer shall be scrapped.
GB
