51
If you have an angled or vaulted ceiling: (Fig 14)
1. When installing the mounting bracket, the bracket groove is upward.
2. You will need a longer downrod.
3. If your ceiling angle is wider than 25°, you will also need an Angled Mounting Kit.
(Fig. 14)
HANGING CEILING FAN & INSTALLING POWER ADAPTER & WIRING THE FAN:
WARNING: To reduce the risk of fire, electric shock or other personal injury,
mount the fan only to an outlet box or supporting system marked acceptable for
fan support and use the mounting screws provided with the outlet box.
WARNING: Check to see that all connections are tight, including ground, and that
no bare wires are visible at the wire nuts (except for the ground wire).
WARNING: To reduce the risk of fire or electric shock, do not use this fan with any
solid-state speed control device.
WARNING: To avoid possible electrical shock, be sure electricity is turned off at
the main fuse box before wiring.
Hang the installed ceiling fan on the mounting bracket that mounted to the ceiling
as shown in Fig 15, pay attention to the enlarged image as shown in Fig15. The
pivot ball on the down rod needs to hang from inside the socket of the bracket and
match up with a slot to lock the pivot ball in place.
GB
(Fig. 11)
(Fig. 12)
(Fig. 13)
Wood ceiling
ST5x24 Screw
M8x70 Screw
(Not Supplied)
Concrete ceiling
