EN - EHL32 - 2306A
EHL32, EHL45
1
h
i
EHL45: 4-Ø9 HOLES
EHL32: 4-Ø7 HOLES
Model number
A
B
EHL32
412
25
EHL45
443
40
■
Parts
Definition
■ Installation
Wiring Instructions
Parts Definition/ Installation
• First, machine taps or holes on the mounting surface
①
.
• The mounting hole of this product is EHL32: 6mm in diameter
(Slot hole), EHL45: 8mm in diameter(Slot hole).
• When machining taps, fasten the bolt through the mounting hole
of the product.
• When machining holes, insert the bolt through the hole of the
product, and tighten the nut from the opposite side of the
mounting surface.
+
-
2
1
3
4
+
-
• This product can be wired regardless of polarity(AC Type).
• Please connect the 4 pins located in M12 connector cable to
the M12 socket of the product.
DC
AC
M12 connector type
Red
Black
Red
Black
Power
Power
Power
Fuse
Fuse
Fuse
Installation Environment and Protection Rating
• This product is designed for indoor use with protection rating of IP67.
• If the product is installed in locations that subject it to excessive dust
or water other than the designated IP protection rating
indicated, it may cause malfunction or damage to the product.
• For further information, please visit our website (www.qlight.com).
Mounting Hole Specifications
• Machine holes on the mounting surface referring to the
diagram below.
Product Operation Inquiry / Customer S82-51-620-4100
You can expect prompt service if you have exact information such as model name, symptom, telephone number and address.
※
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
www.qlight.com
Lens(Tempered glass)
Housing(Al)
Bracket(STS)
