INS #
Brand Logo
reversed out of
black
INS #
WARNING
Do not energize the LED Engine until the protective
cover has been removed with the optic and lower trim
properly installed. Do not touch the surface of the LED
as it may damage the light engine.
otee:
N
This fixture should be supported by main runners or
other structure that is capable of supporting fixture
weight of 35 Ibs.
SAFETYe:
When using electrical equipment, basic safety
precautions should always be followed, including the
following:
1. This unit is for recessed mounting only. Do not use in
hazardous locations nor near gas or electric heaters.
2. Do not use this equipment for other than the intended
use.
3. Install only in accordance with National Electrical Code
and local regulatory agencies’ requirements.
IMPORTANTe:
Read carefully before installing fixture.
Retain for future reference.
WARNING
Risk of Electrical Shock! Disconnect power at fuse or
circuit breaker before installing or servicing.
WARNING
Risk of Fire! For Non-IC fixtures do not install
insulation within 3 inches (76 mm) of any part of the
luminaire fixture or in a way that may entrap heat.
WARNING
Installation and servicing to be performed only by
qualified personnel. If not qualified, consult an
electrician.
Installation Instructions - LDSQA4 Commercial Recessed
Adjustable LED
Instructions d’installation - Lampe commerciale réglable encastrée à
DEL LDSQA4
Instrucciones de instalación - del LED ajustable comercial
empotrado LDSQA4
Aperture Ceiling
Cutout
Fixture
Height
Lumens
Ceiling Type
LDSQA4
5-1/4”
x
5-1/4”
5-1/8”
x
5-1/8”
9"
900-1800
IC or Non-IC
2800
Non-IC
Figure 1.
IL520003EN
