Qlight GW768, User Manual

Page: 31 / 69

24
Wireless Network System User Manual
8. Software installation
1) Serial to USB Driver installation
There are two ways of receiving or controlling the status information of a wireless signaling device:
One is using USB dongle and the other one is gateway’s USB interface. In both cases, 'USB to serial
device driver' should be installed(download it from Qlight website).
- Select x64 or x86 .EXE file depending on your PC operating system.
- Device driver is from Silicon Labs.
(1) Installation of PC Application
The PC application is used to monitor, set, and control the status information of a wireless signal
information device.
- In the case of using C# Library, refer to the Library User Manual, which is separately provided.
Please download the PC Application from our website and install it.
- After the installation completes, check if COM# Port is displayed in the Device Manager of PC before
connecting the USB dongle or the gateway through a USB port.
- COM# (number) can vary depending on your PC environment.