Qlight GW768, User Manual

Page: 48 / 69

41
Wireless Network System User Manual
Field Description Range
Node ID
It can set the node ID of a wireless signal information device.
The setting range of the node ID is wide but a group can use
overlapped node ID.
One group can connect up to 32 routers and thus most of the
groups use node ID between 01 and 32.
0 to 65535
Channel
It can set the wireless channel frequency.
There are a total of 16 frequency channels but be careful not
to set an overlapped channel with a Wi-Fi frequency band.
(It is advised to use the same ID as group ID.)
11ch to 26ch
Panid
It is an identifier for an individual network and used as a
client's unique number.
(It is set by the manufacturer when the product is shipped
out.)
0 to 65535
Txpower
It is a wireless transmission output value. The greater the
setting is, the greater the power is.
(The default value is set to 10 when the product is shipped
out.)
-31 to 10
TTL
It sets Hop transmission count in the mesh network.
(The default value is set to 6 when the product is shipped
out.)
If many wireless information devices are being used and
they are within the communication distance of 30 meters,
reduce the count to 5 or lower. Otherwise, it could increase
communication traffic.
3 to 8