Qlight GW768, User Manual

Page: 41 / 69

34
Wireless Network System User Manual
Field Description Range
Sound Type Select the sound output mode for the router. Speaker/Buzzer
Sound Source
When the speaker is selected as the sound type, select the
sound tone (color).
WS/WP/WM/WA/WV
Lamp Layer
Select the number of LED colors for the wireless signal
information devices.
It may vary depending on a product.
1 to 5
Name
It can change the name of a wireless signal information devi
ce.
Less than 20 alphabets
Group ID
It can change the group of wireless signal information devic
es.
(It is recommended to use the same group ID as channel ID
)
0 to 65535
Node ID
It can set the node ID of a wireless signal information
device.
The setting range of the node ID is wide but the groups can
use overlapped node IDs.
One group can connect up to 32 routers and thus most of
the groups use node ID between 01 to 32.
0 to 65535
Channel
It can set the wireless channel frequency.
There are a total of 16 frequency channels but be careful
not to set an overlapped channel with a Wi-Fi frequency
band.
(It is advised to use the same ID as group ID.)
11ch to 26ch
Panid
It is an identifier for an individual network and used as a clie
nt's unique number.
(It is set by the manufacturer when the product is shipped o
ut.)
0 to 65535
Txpower
It is a wireless transmission output value. The greater the
setting is, the greater the power is.
(The default value is set to 10 when the product is shipped
out.)
-31 to 10
TTL
It sets Hop transmission count in the mesh network.
(The default value is set to 6 when the product is shipped
out.)
If many wireless information devices are being used and
they are within the communication distance of 30 meters,
reduce the count to 5 or lower. Otherwise, it could increase
communication traffic.
3 to 8