Cleaning the Hub
WARNING:
Always turn Qleeno completely off and disconnect it from the power source when not in use or
before storing, making adjustments, changing brushes, performing any type of cleaning, maintenance, or repair
work.
NOTICE:
The hub should be cleaned after each use to ensure optimum performance.
1. Turn hub insert clockwise to release bayonet lock.
2. Remove and clean hub insert. Clean inside of hub.
3. To reassemble hub, mate grooves on hub insert with screws around hub, seat insert fully and turn counterclock-
wise to lock in place.
Changing the Squeegee Ring
1. Remove brush or pad holder.
2. Disconnect all three suction hoses from hub.
3. Lift squeegee ring just enough to allow access to nuts on mounting frame.
5. Using an 8mm wrench, remove nuts holding squeegee ring to mounting frame and replace with new ring.
6. To secure squeegee ring, follow steps 1 - 5 in reverse order.
1. Hub
3. Squeegee Ring Mounting Frame
5. 8mm Nut
2. Squeegee Ring
4. Suction Hose
9
4
3
1
2
5
!