Installation
26
UM-PRORUNNER_mk9-2.0-EN
5.3
Transport
During transport, the machine must be placed
in a horizontal position with the carrier facing
upwards when fully assembled.
5.3.1
General preparation
1.
Calculate the total weight before moving the machine.
-
The weight of the machine is given on the identification plate. Refer to section
-
Add to this, the weights of any attachments to the machine, for example, product
conveyors. The weights are given on the identification plates of the product
conveyors.
5.3.2
Vertical transport
1.
Check the type plate for the exact weight
of the machine.
2.
Use a suitable hoisting system that
complies with local regulations.
3.
Attach a suitable hoisting belt or hoisting
chain (A) to the hoisting eyes of the
machine.
4.
If necessary, put the machine in the
vertical position. Make sure that the
machine does not tip over after it has been
put in the vertical position.
5.
Make sure that the bottom side of the
machine (B) is not dragged along the
ground during transport.
5.4
Unpacking
1.
Check the packing list when unpacking the machine.
2.
Immediately report damage or missing parts to Qimarox.
A
B
B
B