UM-PRORUNNER_mk9-2.0-EN
5
About this manual
1
About this manual
1.1
Introduction
This manual provides information about the PRORUNNER mk9 machine, which is used
for the vertical movement of products within a transport system. From here in the manual,
the PRORUNNER mk9 will be referred to as the “machine”.
This manual is intended for:
•
Retailers/Original Equipment Manufacturers (OEM) project engineers and mechanics.
•
Operator, installation and maintenance engineers and other users.
It is important to carefully read this manual as soon as possible after purchase of the
machine.
Before you operate the machine, this manual should be read by all users. This is
necessary to make sure that all new users are familiar with the content of this manual.
System integrators/OEMs
This manual explains machine configurations you can use to setup the machine. It also
provides instructions on how to add or change the machine technical components.
Users
The machine may be supplied pre-assembled, if so, some chapters in this manual will not
be applicable. To integrate the machine within a transport system, Qimarox advises you to
refer to documentation provided by the OEM of the transport system.
1.2
Product documentation
/i
1.3
Source language
This manual was originally written in the English language.
Document
Reference
Machine manuals
1
1
Generic information for each machine, apart from exceptions outlined in the machine lay-
out drawing.
UM-PRORUNNER_mk9-2.0-EN
Machine layout drawing
2
2
Machine specific information.
Refer to section
.
Electrical diagrams
1
Specification sheet
2
OEM parts of the machine:
•
Bolts and nuts
•
Motor reductor
•
Photocells
•
Runners
•
Chain
•
Induction switches
•
Limit switches
•
Belts
