Qilive Q.6594, User Manual

Page: 32 / 260

32
EN
Problems
Possible
causes
What to do
Dishwasher
doesn’t
start.
Fuse blown
or the circuit
breaker is
tripped
Replace the fuse or reset the circuit breaker.
Remove any appliances sharing the circuit with
the dishwasher.
Power supply is
not turned on.
Make sure the dishwasher is turned on and the
door is closed securely. Make sure the power
cord is plugged into the wall socket.
Water pressure
is low.
Check that the water supply is connected
properly and the water is turned on.
The dishwasher
door is not
closed properly.
Make sure to close the door properly and latch
it.
Water not
pumped
from
dishwasher
Twisted or
trapped drain
hose.
Check the drain hose.
Filter clogged. Check the coarse filter.
Kitchen sink
clogged.
Check the kitchen sink to make sure it is
draining well. You may need a plumber.
Suds
remaining
in the tub.
Wrong
detergent.
Use only dishwasher detergents to avoid excess
suds. If suds remain, or excess suds occur,
open the dishwasher and let the suds subside.
Add 1 gallon of cold water to the bottom of the
dishwasher. Close the dishwasher and select
any cycle. Initially, the dishwasher will drain
the water. Open the dishwasher door, after the
water is drained, and check if the suds have
been cleared. Repeat if necessary.
Spilled rinse-aid. Wipe up rinse-aid spills immediately.
Stained tub
interior.
Detergent with
a colourant may
have been used.
Use only colourant-free detergents.