Qilive Q.4436, Manual

Page: 9 / 111

9
EN
5.2.3 View a contact (from idle)
Press the <UP/DOWN> keys to select the desired contact
Press the <LEFT KEY> and use the <UP/DOWN> keys to select «VIEW».
Press the <LEFT KEY> and use the <UP/DOWN> keys to view the details of the selected contact.
Note: If the number exceeds 12 digits, use the <LEFT KEY> and <RIGHT KEY> to view the others.
5.2.4 Edit a contact (in idle)
Press the <UP/DOWN> keys to select the desired contact entry.
Press the <LEFT KEY> and use the <UP/DOWN> keys to select «EDIT».
Press the <LEFT KEY> to display the selected contact entry and edit the name/number.
Press the <LEFT KEY>, use the <UP/DOWN> keys to select a ringtone, then confirm.
5.2.5 Delete a contact (in idle)
Press the <UP/DOWN> keys to select the desired contact entry.
Press the <LEFT KEY> use the <UP/DOWN> keys to select «DELETE».
5.2.6 Delete all contacts
Press the <UP/DOWN> keys to select the desired contact entry.
Press the <LEFT KEY> and use the <UP/DOWN> keys to select «DELETE ALL».
5.2.7 Check contact capacity
You can check how many contact entries have been occupied and how many are left.
Press the <LEFT KEY> and use the <UP/DOWN> keys to select «CAPACITY».
5.2.8 Speed dial
After configuring a speed dial number, you can dial that number directly by pressing and holding the
corresponding digit from the idle screen.
5.2.9 Add/edit a speed dial number
Press the <LEFT KEY> and use the <UP/DOWN> keys to select «FASTDIAL».
Press the <UP/DOWN> keys to select a digit from 2-9 and press the <LEFT KEY>.
Press the <UP/DOWN> keys to select an entry from contacts, then the <LEFT KEY> to confirm.
5.2.10 Delete a speed dial number
Press the <LEFT KEY> and use the <UP/DOWN> keys to select «FASTDIAL».
Press the <UP/DOWN> keys to select a digit from 2-9 and press the <LEFT KEY>.
Press the <UP/DOWN> keys to select an entry from your contacts.
Press the <LEFT KEY> and use the <UP/DOWN> keys to select «DELETE», then confirm the deletion.
5.3 Caller display (network dependent)
1. Press the <UP> key or the <LEFT> and <UP/DOWN> keys to select «CALL LOG».
2. Press the <UP/DOWN> keys to select the desired entry.
Only available if subscribed to a caller ID service. The device can store up to 10 received calls with
date/time information in the call log. The number is displayed when the phone is ringing and if matching
your contacts, the name will display with the number and the contact's ringtone will sound. If the caller
has disabled caller information, “WITHHELD” will display. If the caller number is not provided, “OUT OF
AREA” will display. If in standby and three unanswered calls are received, “3 NEW CALLS” will display.
5.3.1 View the call log
All received calls are saved in call log and sorted descending from the latest. When the call log is
at capacity, the oldest call is replaced. Unanswered calls that have not been read are marked with a
<* icon> at the centre of the bottom line of the display. Press <#> to view the caller’s number if
applicable.
5.3.2 Store a call log number in contacts
Press the <LEFT KEY> and use the <UP/DOWN> keys to select «STORE».
Press the <LEFT KEY> to enter the name and <LEFT KEY> to display the selected call log number.
Press the <LEFT KEY> and use the <UP/DOWN> keys to select the ringtone.
5.3.3 Delete an entry in the call log
Press the <LEFT KEY> and use the <UP/DOWN> keys to select «DELETE».
5.3.4 Delete the entire call log
Press the <LEFT KEY> and use the <UP/DOWN> keys to select «DELETE ALL».
5.3.5 View a call log entry
Press the <LEFT KEY> and use the <UP/DOWN> keys to select «DETAILS».
Press the <LEFT KEY> to display the date and time of the selected call log entry.
5.3.6 View missed/dialed/received calls
Press the <LEFT KEY> and use the <UP/DOWN> keys to select «CATEGORY».
Press the <LEFT KEY> to view missed, dialed, and received calls.