35
Operation Manual of Intelligent High Speed Dome Camera
Chapter Five
Short-cut Operations and Specification of Dome Device
1
．
Short-cut operation table
System Preset Short-cut Operation Table
PreShot 80 (Call 80)
Run PTZ Tour 1
PreShot 81 (Call 81)
Run PTZ Tour 2
PreShot 82 (Call 82)
Run PTZ Tour 3
PreShot 83 (Call 83)
Start VectorScan 1
PreShot 84 (Call 84)
Start VectorScan 2
PreShot 85 (Call 85)
Start VectorScan 3
PreShot 86 (Call 86)
Start VectorScan 4
PreShot 87 (Call 87)
Start VectorScan 5
PreShot 88 (Call 88)
Start VectorScan 6
PreShot 89 (Call 89)
Joysticks between freeze and unfreeze video
PreShot 90 (Call 90)
Setup the Menus and Camera
PreShot 91 (Call 91)
Invokes the Flashback Function
PreShot 92 (Call 92)
Administrator Logon
PreShot 93 (Call 93)
Operator Logon
PreShot 94 (Call 94)
Restart Dome Power Supply (Set No.94 preshot
as power supply for shutting down the dome)
Description of the preset point:
Preset point of the position: 220
Function short-cut preset point: 51-63, 78-101
Note:
Dom
e operation will be different due to controller’s different specs.
Preset point setting: Method 1: Firstly input “PRESET”, and then input the number of the
preset point. Press “ENTER” in the end.( No. + ENTER)
Method 2: Firstly input the number of preset point. The press “SHOT”.
Press “ON” in the end.(Preset point No. + Shot + ON)
Call Preset point: Method 1: Firstly input “CALL”. Then Input the number of the preset point.
Press “ENTER” in the end.(Call + Preset Point No. + ENTER)
Method 2: Firstly input the number of preset point. Then press “SHOT”.
