34
Operation Manual of Intelligent High Speed Dome Camera
Note
:
If it is set up as ON, the assignment would be executed at the designated time. Otherwise,this assignment
would not be executed. But all data would not be cleared.
IRIS CLOSE to exit
9.3 Power Timer
<< Power timer setup
Press OPEN or Joystick left/right to enter
Note
:
A.User can perform timed startup and shutdown for the dome system.
B.The interval period between startup and shutdown time is system startup operating status.
While the shutdown time to startup time is the system shutdown status.
C.Make sure that startup time is earlier than shutdown time, otherwise the system will always stay in the
shutdown status.
D.The system will wake for startup once the controlled command is received. If no controlled command received
at an interval of 60 seconds under non-menu status, it would re-enter into shutdown status.
E.The priority of Assignment is higher than that of the Power Timer. Namely, assignment will be first executed no
matter it is under startup or shutdown status, and the Power Timer can only be entered after the execution of
Assignment has been completed, while other non-Assignment functional operations or executions would be
automatically discontinued or quitted before Power Timer is executed.
①
Mode Off
<< Mode Off
Joystick left/right to select
Off/Eachday/Workday/Weekend/Mon/Tue/Wed/Thurs/Fri/Sat/Sun
②
Power On Setup
<<
Power On Setup
Press OPEN or Joystick left/right to enter
Refer to
Number Input Steps Instructions
to set power on time.
③
Power Off Setup
<< Power Off Setup
Press OPEN or Joystick left/right to enter
Refer to
Number Input Steps Instructions
to set power off time.
IRIS CLOSE to exit
Power On Setup
1 Hour 0
2 Minute 0
3 Second 0
IRIS CLOSE to exit
Power Off Setup
1 Hour 23
2 Minute 59
3 Second 59
IRIS CLOSE to exit
