6
3.1 DVO Termination Installation
Termination Installation
1. Determine proper location for termination.
2. Cut an 8-1/2” hole through the wall.
3. Pull apart the inner and outer termination sections
4. From outside the building, insert the outer section through the wall until it rests against
the wall. Position the outer section so that the air intake is on the bottom. Secure to
outer wall using four screws. Seal with a weather proof sealant around the edge to
avoid water from entering.
5. From the inside, slide the inner wall plate over the outer section and secure it to the
wall with four screws.
