QGarden QG40-145SP, Instruction Manual

Page: 16 / 36

ENGINE STARTING & STOPPING PROCEDURE
NOTE:
Starting an engine without engine oil or fuel can seriously damage the machine
STARTING THE ENGINE (COLD)
1. Push the engine primer bulb, located on the front of the engine, a maximum of 3 times.
2. Pull the OPC/Brake lever towards the main handle. Do not let go.
3. Grab the recoil starter handle and pull lightly until resistance is felt, then pull rapidly.
4. The engine should start.
5. Rehouse the recoil starter handle. Do not let it go until housed to prevent damage.
6. If the engine does not start, run through from step 2 again.
NOTE:
If the engine won’t start after you have operated the starter several times, the engine may
be flooded with excess fuel. Use the following procedure to clear and start a flooded engine .
1. Release the OPC/Brake lever.
2. Remove the spark plug, dry it, and then reinstall it .