Sportrex 2019 Update
Subject to change. 08|2019 –
31
Adjusting the suspension
The leaf springs of the
Sportrex
are adjustable by simply moving the clamps.
Caution!
Make sure that the resilience is suitable for the current load each time you drive. If you hear
strokes while driving over bumps, then the suspension is set too softly. Immediately adjust
the setting by moving the clamp towards the wheel axle.
Danger!
Always set the same values on both leaf springs; different spring travels can negatively
influence the driving behavior.
f
Loose the knurled screw in order to move the clamp on the leaf spring sheets.
f
Move the clamp with the knurled screw according to the following instructions:
–
Move the clamp all the way to the front when
you carry a very light child and little luggage (soft
suspension).
–
Move the clamp backwards for two children and a lot
of luggage (harder suspension).
f
Tighten the knurled screw firmly and put the same value
on the other leaf spring.
Storage
For storage, simply fold the
Sportrex
together and store it in a protected and dry place without direct
sunlight. Please also consider the information in the chapter
„Care“ on page 33
.
Danger!
Hands or fingers can become trapped on moving parts while setting up and folding up the
cab. Carry out work carefully and keep children away from the vehicle.
f
Take position behind the cabin and open the storage
space cover.
f
Pull both sliders on the vertical cabin tubes all the way
up. This releases the lock on the rear frame rod.
f
Press the rear frame rod inwards.
f
Fold up the cabin by pressing both sides of the rear cabin
frame all the way down.
f
In order to take up less space, you can also fold in the
push handle and remove the wheels.
f
In the lowest position, the push handle also serves as
a transport lock for the cabin preventing it from folding
open.
Utilisation
