Sportrex 2019 Update
Subject to change. 08|2019 –
17
Assembly
Reinsert the brake cable
f
Insert the barrel-shaped end piece of the brake cable
into the recess of the toggle.
f
Then place the toggle and brake cable into the socket
of the parking brake module‘s cover.
f
Place the cover on the parking brake module and screw
it back in place using the previously loosened screws.
f
Repeat the procedure on the second parking brake
module..
f
Use the supplied cable ties to fix the brake cable to the
axle.
Optional assembly steps
Installing the buggy wheel
You need the buggy wheel for Buggy and Walker mode. The buggy wheel is connected directly with the
wheel suspension attached to the frame and is mounted so that it can rotate through 360°.
f
Lift the cabin at the front.
f
Place the buggy wheel into the wheel mount as far as it
will go, until it engages audibly with a clicking noise.
f
Check whether there is sufficient air in the buggy wheel
(maximum air pressure: 1.9 bar). If necessary, use an air
pump for car valves to top up with air.
