QEI DIO-9110 User Manual Download Page 41

Page: 41 / 45

UG-1084

ePAQ-9405

User’s Guide

Test Panel



15.13 Displaying Dip Switch States (DIP)

A test panel command is available for examining the state of the 16 dipswitches on
the ePAQ. Type

DIP

<enter> from the test panel. Dip switches are displayed in the

order that they appear on the front panel.

Example:

DIP <enter>

Display:

ePAQ-9405_A> DIP

00010110 00001100

ADD-A. ADD-B.

15.14 Displaying the Software Version (VER)

To display the version of software residing in the ePAQ, type

VER

<enter>.

Example

VER <enter>

Display

QEI ePAQ-9405 Link:80-013XXX-XXX 3/22/16 Chksum: 6320d4ca

15.15 TP Command

This command invokes a software monitor, which is useful in diagnosing different
types of problems.

Example

Type TP 15 <enter>

Display

Software Monitor running at level 15

The ePAQ will print error and informational messages (if any) on the test panel, while
in operation.

15.16 SOE Command

This command allows saved SOE events to be viewed.

SOE <[point number]> <count>

SOE events are displayed most recent first, in the following format:

soe

52 events available (in Ram)

Summary of Contents for DIO-9110














































Search results

Summary of Contents for DIO-9110

Reviews:

Related manuals for DIO-9110

Brands by name

Popular brands

QEI DIO-9110, User Manual

Search results

Summary of Contents for DIO-9110

Reviews:

Related manuals for DIO-9110

Brands by name

Popular brands