ePAQ-9405
User’s Guide
UG-1084
22
Ordering Information
Copyright © 2017 QEI
2 = Two Momentary KUEP Form C Type
3 = Two Momentary KUEP Form X Type
4 = One Latching KUL Type
5 = One Latching Form C (277VAC)
6 = Two Momentary Form C (277VAC)
F = Mounting Option
1 = Rack Mount Brackets, Front of enclosure.
2 = Rack Mount Brackets, Rear of enclosure
3 = Rack Mount Brackets, Bottom of enclosure.
G = Analog Option
1 = 0-1 mA
2 = 4-20 mA
3 = 5Vdc
Note 1: External keying voltage source is provided by the customer. An isolated or non-
isolated source can be used. The TB3C right-most end terminals may be used as tie
points for the customer’s keying voltage. The proper keying voltage option must be
selected to match the customer provided keying voltage source.
Note 2: Internal non-isolated keying voltage source is tapped from the DIO-9110 input voltage
source, and appears at terminal block TB3C right-most end terminals. The proper keying
option must be chosen to match the DIO-9110 input voltage option.
Note 3: Internal isolated 24Vdc keying voltage source from a DC-DC converter.
Note 4: 277Vac Input Tol.=+5% max.
Summary of Contents for DIO-9110
Page 1: ...UG 1084 ePAQ 9405 User s Guide December 2018 ...
Page 4: ......
