QED BIOGAS 5000, Operating Manual, Page: 14 / 108

5K-MNL-BIOGAS5000
BIOGAS 5000 gas analyzer
Page
14
4.0 BIOGAS 5000 optional products and accessories
4.1 Optional products
The BIOGAS 5000 gas analyzer has a number of optional products for purchase which
enhance the usability and enable further analysis of data and reading information.
 Note: For more information on the features listed in this section please contact Sales at
LANDTEC at +1 (909) 783-3636 or email Sales@landtecna.com .
4.1.2 BioPro Orifice plate (optional)
LANDTEC recommends the use of orifice plates as good practice when using the BIOGAS
5000 gas analyzer, enabling repeatability in flow measurement via a fixed method.
4.1.3 Temperature probe (optional)
The BIOGAS 5000 gas analyzer has the facility to automatically display and record the
borehole temperature via an optional temperature probe.
When a temperature probe is fitted the temperature reading will be displayed on the ‘Main
Gas Read Screen’ and recorded with all other data.

Note: Temperature probes with an Ex label are part of the BIOGAS 5000 Ex certification
SIRA 11ATEX2197X and IECEx SIR11.0089X, and therefore certified for use
under the same conditions as the analyzer.
GPS (optional)
An optional GPS feature is available for the BIOGAS 5000 gas analyzer. It enables the gas
technician to automatically locate sample locations using GPS satellite signal from predefined
sample location IDs uploaded from LANDTEC System Gas Analyzer Manager or set on the
analyzer when out in the field prior to taking a reading. The GPS reading data is stored with
each reading providing an audit trail, as it confirms where the reading was taken.
4.1.6 Bluetooth dongle (optional)
An optional Bluetooth feature enables the operator to set and utilize Bluetooth technology.
This may be useful when downloading gas readings from the analyzer to the PC instead of
connecting the analyzer to a PC via a USB lead. Bluetooth may also be used to transfer Site
IDs to other 5000 series gas analyzers if required. Bluetooth is activated by plugging the
dongle into a pc USB port and switching on the Bluetooth option feature in the settings on
the analyzer.