Manual for Synactix 1E
ACPI LED Connector (ACPI LED)(Reserved)
The ACPI LED is a double-color light with three pins. Pin1&Pin2 drive different color lights. If
Pin1 drives the orange light , Pin2 drives the green light, the following status will come out.
When the system is in power up status, the LED is green on. When the system is in suspend
status, the LED is green blink. When the system is in Suspend to RAM status, the LED is
orange on. When the system is in soft-off status, the LED is off.
Hardware Green Connector (SLEEP SW)
Push once the switch connected to this header, the system enters suspend mode.
Key Lock Connector (KEYLK)
The connector can be connected to the keyboard lock switch on the case for locking the
keyboard.
Infrared Header (IrDA)
This connector supports wireless transmitting and receiving. Before using this function,
configure the settings for IR Address, IR Mode and IR IRQ from the “INTEGRATED PERIPH-
ERALS” section of the BIOS.
POWER
SW
SLEEP
SW
SPEAKER
RESET
GREEN LED
KEYLK
PWR LED
ACPI LED
HD_LED
SPEAKER
RESET
GREEN LED
KEYLK
ACPI LED
POWER
SW
SLEEP
PWR LED
HDD LED(+)
HDD LED(-)
ORANGE(-)
GREEN(-)
LED+(VCC)
POWER
GND
EMPTY
EMPTY
SLEEP
GND
LED+
LED-
LED-
KEYLOCK
GND
LED-
LED-
LED+
EMPTY
GND
RESET
SPKDATA
NC
GND
VCC
VCC
IRRX
GND
IRTX
NC
Installation Instructions
