Manual for Synactix 1E
Memory Configuration
This mainboard provides three168 pin 3.3V PC133 un-buffered DIMM sockets to support
a flexible memory size ranging from 32MB up to 512MB for SDRAM. PC100/PC133MHz
SDRAM with SPD are supported, the following set of rules allows optimum configurations.
l
Possible SDRAM DIMM memory sizes are 32MB, 64MB, 128MB, 256MB, 512MB in each
DIMM socket, but the total memory size cannot exceed 512MB.
l
Processor with 66MHz FSB should be paired with PC100, PC133 SDRAM
processor with 100MHz FSB should be paired with either PC100 or PC133 SDRAM,
processor with 133MHz FSB should be paired with PC133 SDRAM.
l
Supports Suspend to RAM.
l
Supports up to two double-sided or three single-sided DIMMs(4 Rows Max) at 133MHz
system memory bus(PC-133).
Installation of All Drivers (EASY!)
A QDI Driver CD 2000 is supplied with this mainboard, all drivers can be installed from this
CD-ROM. Before installing the drivers, check the system requirements such as the enough
system memory (at least 32MB for Windows 95/98 system or 64MB for Windows 2000
system) and enough disk space. Windows 95 or Windows 98 must be fully installed and
running on the system. All running applications should be closed before installing these
drivers.
Features of this CD-ROM:
- DemoShield Software
Utilizing DemoShield software to develop it, providing you a very new, easier-to-use and
more intuitive user interface.
- Point-and-Click
when using this CD-ROM, just point to the option you required and click it, then the driver
or the software that you need will be automatically installed.
- Intelligently Recognition
Automatically recognizing the hardware, then installing the necessary drivers for your
onboard components to work properly.
Please refer to page 41 to get more detailed information of the contents contained in this
CD-ROM.
Installation Instructions
