Manual for Synactix 1E
BIOS Description
l
Swap Floppy
Enabled
If the system has two floppy drives, choose
Drive
Disabled
enable to assign physical drive B to logical drive
A and vice-versa.
l
Boot Up
Enabled
Tests floppy drives to determine whether they
Floppy Seek
Disabled
have 40 or 80 tracks.
l
Boot Up
O n
Selects power on state for NumLock.
NumLock Status
Off
l
Gate A20 Option
Normal
Lets chipset control GateA20 and Normal - a pin
Fast
in the keyboard controller controls GateA20.
Default is Fast.
l
Typermatic Rate
Enabled
Keystrokes repeat at a rate determined by the
Setting
Disabled
keyboard controller - when enabled, the
typematic rate and typematic delay can be
selected.
l
Typermatic Rate
6-30
The rate at which character repeats when you
(chars/sec)
hold down a key.
l
Typermatic Delay
250-1000
The delay before keystrokes begin to repeat.
(Msec)
l
Security Option
Setup
Selects whether the password is required every
System
time the system boots or only when you enter
setup.
l
OS Select For
Non-OS2
Selects OS2 only if you are running OS/2 operating
DRAM>64MB
OS2
system with more than 64MB of RAM.
l
HDD S.M.A.R.T.
Disabled
Disables hard disk S.M.A.R.T. support.
Capability
Enabled
Enables hard disk S.M.A.R.T. support.
l
Report NO FDD
Yes
Reports NO Floppy Disk Drive for WIN 95 to
for WIN 95
release IRQ6.
No
Does not report No Floppy Disk Drive for WIN 95.
l
Flash Write
Enabled
This option is for protecting the system BIOS,
Protect
Disabled
when enabled, writing to BIOS area is to be
discarded.
l
Show Bootup
Enabled
The logo will be shown automatically when
Logo
Disabled
system boots up, otherwise, no logo appears
on the screen.
