47
PlatiniX 2E/333
A. Using CBLOGO.EXE Utility (Under DOS ):
1. Copy CBLOGO.EXEand AWDFLASH.EXE from the directory \Utility located on QDI
Driver CD to your hard disk.
2. Get the BIOS file from AWDFLASH.EXE or Download the BIOS file from the Website
(http://www.qdigrp.com) and copy the BIOS file(xxxxxx.bin) to your harddisk.
3. Boot the system into DOS environment, Put your favor picture into BIOS file by CBLOGO.
EXE command. For example: CBLOGO.EXE xxxxxx.bin myphoto.bmp
4. Flash the BIOS to motherboard by AWDFLASH.EXE. For example: AWDFLASH xxxxxx.
bin
B. Using QFlash (Under Windows ):
1.Download the QFlash Utility from the Website (http://www.qdigrp.com) or get it fromQDI
Driver CD.
2.Run QFlash program step by step, following the directions until complete it .
3.Reboot the system, you can see the new picture displayed on the screen.
The BIOS of the mainboard is contained inside the Flash ROM. Severe viruses such as CIH
virus are so dangerous that it may overwrite the BIOS of the mainboard. If the BIOS has been
damaged, the system will be unable to boot. We provide the following solution which protects
the system BIOS from being attacked by such viruses.
There are two choices which implements this function.
1.Set the jumper (BIOS_WP) as closed, the BIOS can not be overwritten.
2.Set the jumper (BIOS_WP) as opened, meanwhile set Flash Write Protect as Enabled in
CMOS Setup.In this way, the BIOS can not be overwritten, but the DMI information can be
updated.
BIOS_ProtectEasy
BIOS_ProtectEasy
BIOS_ProtectEasy
BIOS_ProtectEasy
BIOS_ProtectEasy
Note:
If you require more parameters information concerning CBLOGO.EXE,
please refer to the online help. If you dont prefer the logo displayed
on the screen during bootup, set the Show Bootup Logo option as
Disabled in CMOS Setup.
All manuals and user guides at all-guides.com
