20
QDI
Installation Instruction
Enable keyboard password power-on function (JKB)
The mainboard provides the advanced keyboard password power-on function. Before using
this function, set JKB with pin1 & pin2 closed. Otherwise, set JKB with pin2 & pin3 closed for
disabling.
Furthermore in order to implement this function, set POWER ON Function to Password
and enter the keyboard power-on password in the INTEGRATED PERIPHERALS section
of the CMOS SETUP. Save and exit, then power off your system. In this case, the power
buttons power-on function is disabled.
1. If using this function, 5VSB line of the power supply should be
capable of delivering enough current for all the devices con
nected to the keyboard port, if not, you will be unable to power
up the system using the keyboard.
2. If you set JKB with pin2 & pin3 closed, set POWER ON Func
tion to BUTTON ONLY, dont set it to Password, or youll be
unable to power up your system by the keyboard or the power
button.
3. If you encounter the above problems, clear CMOS and set
the jumper pin2 and pin3 closed to disable the function,them
power on the system by pushing the power button,and set
power on Fuction back to Button Only.
Note:
JKB
1
2
3
1
2
3
Disable
Enable
All manuals and user guides at all-guides.com
