Installation Instructions
18
Manual for PlatiniX 1E series
Overclocking Jumper Setting (JFSB)
The jumper JFSB located on the mainboard provides users with CPU overclocking feature. The
host bus speed can be set as 100/133MHz. The table below for your reference.
However, whether or not your system can be overclocked depends on your processors
capability. We do not guarantee the overclocking system to be stable.
Warning: Be sure your selection is right. CPU over speed will be dangerous! We
will not be responsible for any damages caused.
JFSB
1
2
3
Enable/Disable onboard LAN (JLAN)
(available on PlatiniX 1E-L/-AL/-6AL)
This Jumper allows you to use the onboard LAN function. Before using this function,set
JLAN with pin1 and pin2 closed.Otherwise set JLAN with pin2 and pin3 closed for disabling.
JLAN
Disable:
Enable:
1
1
3
2
2 3
JLAN
FSB 100MHz 133MHz
Open
JFSB
2-3
AUTO
1-2
P1Een.p65
02-6-5, 16:26
18
