17
Manual for PlatiniX 1E series
Chapter 2
Clear CMOS (JCC)
If you want to clear CMOS, unplug the AC power supply first, close JCC (pin1 & pin2)
once, set JCC back to the normal status with pin2 & pin3 connected, then power on the
system.
JCC
JCC
1
3
Normal status
(default)
Clear CMOS
(Unplug the AC power supply)
1 2 3
2
Wake-Up On LAN (JP5)
(available on PlatiniX 1E-L/-AL/-6AL)
This Jumper allows you to enable or disable the onboard LAN wake up function.If you wish
to use wake on LAN function,set the jumper JP5 as closed.Otherwise ,set JP5 as opened
for disabling this function.Before using this function,set Wake-Up by Ring as Enabled in
the POWER MANAGEMENT SETUP section of the BIOS. Save and exit, then boot the
operating system once to make sure this function takes effect.
Disabled
Enabled
2
1
JP5
JP5
1 2
P1Een.p65
02-6-5, 16:26
17
