Installation Instructions
16
Manual for PlatiniX 1E series
Jumper Settings
Jumpers are located on the mainboard, the yare, clear CMOS jumper JCC, enable keyboard
password power-on function jumper JKB, and enable/disable onboard audio jumper JSD
etc. Pin 1 for all jumpers are located on the side with a thick white line (Pin1
→
),
referring to the mainboards silkscreen. Jumpers with three pins will be shown as
to represent pin1 & pin2 (1-2) closed and
to represent pin2 & pin3 (2-3) closed.
Jumper Symbol Description Represent
set pin1 and pin2 closed
set pin2 and pin3 closed
close set the pins closed
open set the pins opened
Enable Front/Back Panel USB Device Wake-up Function (JFUSB/JUSB)
The mainboard provides the advanced USB device wake-up function. The system can be
waked up from its power saving status including ACPI S3 by activating USB device.
Before using this function, set JFUSB/JUSB with pin1 & pin2 closed. Otherwise, set
JFUSB/JUSB with pin2 & pin3 closed for disabling. Furthermore, the item Wake-Up From
S3 by USBin CMOS Setup should also be set correspondingly to enable or disable this
function.
JUSB
JFUSB JUSB
Enable
(default)
Disable
JFUSB JUSB
1
2
3
1
2
3
1
2
3
1
2
3
JFUSB
P1Een.p65
02-6-5, 16:26
16
