Manual for PlatiniX 1
Introduction
USB Ports
#"
2 USB Host Controllers with total of 4 ports
"#"
USB 1.1 compliant
"#
Supports wake-up from S1 (power on suspend), S3 (Suspend to RAM) (depend on
device)
Onboard I/O
"#"
Winbond W83627HF-AW I/O controller
"#"
One floppy port supporting up to two 3.5
″
or 5.25
″
floppy drives with 360K/720K/1.2M/
1.44M/2.88M format
"#"
Two high speed 16550 compatible UARTs (COM1/COM2/COM3/COM4 selective) with
16 byte send/receive FIFO
# "
One parallel port supports SPP/EPP/ECP mode
"#"
Infrared interface
"#"
All I/O ports can be enabled/disabled in the BIOS setup
Onboard LAN (Optional)
#"
10/100 Mbit/sec Ethernet support
#"
10/100M LAN interface built-in on board
Onboard Audio(Optional)
AC97 Audio(available on P1-A,P1-AL)
"#"
AC97 2.1 Specification Compliant
"#"
Provides onboard Line-in Jack, Microphone-in Jack, Speaker-out Jack with onboard
amplifier and MIDI/Joystick Connector
C-Media hardware Audio (available on P1-C,P1-CL)
"#"
Provides C-Media 8738 PCI hardware Audio
#"
Provides Front L&R Jack,Back L&R Jack and Center&WooferJack
AGP Interface
"#"
AGP Connector supports AGP 2.0 including AGP 4x data transfers
BIOS
"#"
Licensed advanced AWARD(phoenix) BIOS
# "
supports Flash RAM with 2Mb memory size, plug and play ready
"#"
Supports IDE CD-ROM or SCSI boot up
