Manual for PlatiniX 1
Jumper Settings
Jumpers are located on the mainboard, they represent, clear CMOS jumper JCC, enable
keyboard password power-on function jumper JKB, and enable/disable onboard audio
jumper JSD etc. Pin 1 for all jumpers are located on the side with a thick white line ( Pin1
→
), referring to the mainboards silkscreen. Jumpers with three pins will be
shown as to represent pin1 & pin2 (1-2) connected and to represent
pin2 & pin3 (2-3) connected. For default jumper settings, please refer to the following
table:
JCC
2-3
(Normal Status)
JSD
2-3
(Enable onboard Audio)
JKB
1-2
(Enable KB Power-on)
JAV
Open (Enable Flash BIOS)
JFUSB/JUSB 1-2
(Enable Front/Back Panel USB Device Wake-Up Function)
Installation Instructions
Enable/Disable onboard audio (JSD)(P1-A,P1-AL available)
If you want to use the on-board audio, set JSD with pin2 & pin3 closed (default), Other-
wise, set JSD with pin1 & pin2 closed for disabling this function.
Enable on-board audio:
Disable on-board audio:
JSD
JSD
1
2
3
1
2
3
