Manual for PlatiniX 1
#"
AC97 Modem
Auto
If modem codec was installed on board, the AC97
modem function can be used. otherwise, the
function is disabled.
Disabled
Disable the AC97 Modem onboard.
#"
Onboard/CNR LAN
Auto
If a CNR Interface is enabled, the onboard LAN
""
Selection
will be automatically disabled. Otherwise, the
onboard LAN is enabled.
Onboard
The onboard LAN is enabled.
Ext.CNR
CNR Interface is enabled.
#
IDE HDD Block
Enabled
Allow IDE HDD to read/write several sectors at
Mode
once.
Disabled
IDE HDD only reads/writes a sector once.
#
KBC input clock
6/8 MHz
Set the PS/2 Keyboard input clock as 6/8/12
12/16 MHz
/16MHz.
#
Power On
Button only
Power on by power button
Function
Password
Power on with keyboard password
#
KB Power ON
Enter
Enter keyboard password
Password
#
Onboard FDC
Enabled
Onboard floppy disk controller is enabled.
Controller
Disabled
Onboard floppy disk controller is disabled.
#
Onboard
3F8/IRQ4,
Define the onboard serial port address and
Serial Port 1/2
2F8/IRQ3,
required interrupt number.
3E8/IRQ4,
2E8/IRQ3,
Auto
Onboard serial port address and IRQ are
automatically assigned.
Disabled
Onboard serial port is disabled.
#
UART Mode Select
Normal,
Set UART mode
ASKIR
IrDA
#
RxD, TxD Active
Hi, Lo/Lo, Hi
Default is recommended
Lo, Lo/ Hi, Hi
Item
Option Description
Chapter 3
