QDI Brilliant IV, Manual

Page: 65 / 67

Appendix
57
Appendix C.
LogoEasy
When you power on or reset your system, the picture listed below will be
shown on the screen.
If you press <Esc>, the system will switch to the booting message screen.
Otherwise, it enters operating system directly. You can use “cblogo.exe”
(See Utility Diskette) to replace the picture by any other logo which is
preferred. Regarding the method of using cblogo.exe utility, please refer
to its online help. If you prefer not to show any logo on the screen while
booting up, set “Disabled” to the “Show Bootup Logo” option. Please
refer to page 35.
* We reserve the right of modifying the default full-logo of QDI without further
notification.