QDI Brilliant IV, Manual

Page: 18 / 67

Quick Installation
12
the requirements of Brillinat 4(refer to Chapter 2).
Step 6. Power on the system
Turn on the AC power of the power supply, then press the
Power Button once to turn on the computer power. Before the
button is pressed, the status LED should have flashed at a
frequency of about 1.5Hz. Refer to chapter 6 for details of
Status LED and Power Button.
Step 7. Setting up the system
Enter the “ Setup Menu ” screen of BIOS by pressing the Del
key while powering on or reseting the system. Always “
LOAD SETUP DEFAULT ” at first and select others
necessary that your system require. Exit the “ Setup Menu ”
screen and save the setup data.
Step 8. Enjoy the Brilliant IV
The Brilliant IV is a high-performance, powerful system.
*Note: Please refer to Chapter 6 for details on Hardware
Installation.
Quick Jumper Setting
Jumper Setting Description
JP10 CLOSE (Default) Enable Onboard LAN
(LAN-SELECT) OPEN Disable Onboard LAN
JP15 CLOSE(Default) Enable Onboard SCSI
(SCSI-SELECT) OPEN Disable Onboard SCSI
JP17 1-2 (Default) Auto
(SCSI-TERMINATOR) 2-3 Reserved
OPEN Disable
JP3 2-3 (Default) Normal
(CLEAR-CMOS) 1-2 Close once to clear CMOS.
Before doing this , you must
turn off the AC power