QDI Brilliant IV, Manual

Page: 52 / 67

AWARD BIOS Description
44
•
IDE
Primary/ Secondary
Master/Slave UDMA
Auto
Disabled
Ultra DMA mode will be enabled if ultra
DMA device is detected.
Disables this function.
•
On-chip
Primary/Secondary
PCI IDE
Enabled
Disabled
On-chip primary/secondary PCI IDE port is
enabled.
On-chip primary/secondary PCI IDE port is
disabled.
•
Onboard PCI
SCSI Chip
Enabled
Disabled
Onboard PCI SCSI Chip is enabled.
Onboard PCI SCSI Chip is disabled.
•
USB Keyboard
Support
Enabled
Disabled
USB Keyboard Support is enabled.
USB Keyboard Support is disabled.
•
Onboard FDC
Controller
Enabled
Disabled
Onboard floppy disk controller is enabled.
Onboard floppy disk controller is disabled.
•
Onboard Serial Port
1/2
3F8/IRQ4,
2F8/IRQ3,
Defines the onboard serial port address and
required IRQ.
3E8/IRQ4,
2E8/IRQ3,
Auto System automatically defines the onboard
serial port address and required IRQ.
Disabled, Onboard serial port is disabled.
•
UART2 Mode Select Normal
ASKIR
IrDA
Defines UART2 as the standard serial port.
Supports SHARP ASK-IR protocol with
maximum baud rate up to 57600bps.
Supports IrDA version 1.0 SIR protocol with
maxiumum baud rate up to 115.2Kbps.
•
Onboard Parallel
Port
378/IRQ7,
278/IRQ5,
3BC/IRQ7
Disabled
Defines the onboard parallel port address
and IRQ channel.
Disables the onboard parallel port.
•
Parallel Port Mode SPP Defines the parallel port mode as
EPP Standard Parallel Port (SPP), Enhanced
ECP, Parallel Port (EPP), or Extended
ECP+EPP Capabilities Port (ECP).