QDI Brilliant IV, Manual

Page: 48 / 67

AWARD BIOS Description
40
•
Suspend Mode Disabled
1 Min
∼
1Hr
The system will never enter Suspend mode.
Defines the continuous idle time before the system
entering Suspend mode. If any item defined in
“Wake Up Events In Suspend” is On and
activated, the system will be waken up.
•
HDD Power
Down
•
Throttle Duty
Disabled
1
∼
15 Min
12.5%
25%
37.5%
50 %
62.5%
75%
HDD’s motor will not be off.
Defines the continuous HDD idle time before the
HDD entering power saving mode (motor off).
Selects the duty cycle of the STPCLK# signal
when the system is in the system throttling mode.
•
Resume by
Ring or LAN
Enabled
Disabled
Allows the system to be powered on when a Ring
Indicator signal comes up to UART1 or UART2
from external modem or comes up to WOM# from
internal modem card. Also allow the system to be
powered on when a remote waker-up signal comes
up from Onboard LAN controller.
Does not allow Ring Power-On or Wake On LAN.
•
Resume by Alarm Enabled
Disabled
RTC alarm can be used to generate a wake event
when the system is in a sleeping or in power off.
No RTC alarm function.
•
IRQ 8 Break
Suspend
Enabled
Disabled
Generates a clock event.
Does not generate a clock event.
Note: IRQ8 Clock Event must be enabled when
you want to use Resume By Ring, Resume by
LAN and Alarm.
•
IRQ [3-7, 9-15],
NMI
Enabled
Disabled
Reloads global timer.
No influence to global timer.
…
Parallel Port
PNP/PCI Configuration