IS125 Conveyors | Installation & Maintenance Instructions
25
Maintenance
Belt Tracking
>
For best results, make adjustments to only one side.
u
Belt Tracking at Drive End
4
x
2
x
4
x
1
Loosen all four driver as-
sembly screws ½ turn.
2
With conveyor running, turn
tracking screw toward drive
pulley on side where belt is riding
too close.
3
Allow several full revolu-
tions to determine if belt is
tracked properly. (Repeat Step 2
if necessary)
4
Tighten all four driver as-
sembly screws once track-
ing adjustment is complete.
The Drive End is tracked when the belt can make a full revolution without contacting either bearing plate.
u
Belt Tracking at Tail End
1
Loosen button head socket
screw with 5/32” wrench.
2
Rotate eccentric bearing
clockwise to track belt
toward eccentric bushing and
counter-clockwise to track belt
away from eccentric bushing.
3
Allow several full revolu-
tions to determine if belt is
tracked properly. (Repeat Step 2
if necessary)
4
Tighten button head socket
screw to secure eccentric
bushing.
Tail End is tracked when belt can make a full revolution without contacting either side of frame.
To see a video of this process, scan this code on
your phone or tablet. You may also visit
http://bit.ly/125tracking
