IS125 Conveyors | Installation & Maintenance Instructions
11
u
Mounting to Steel Stand
1
Insert ¾” hex screws
through a flat washer into
slot on mount.
2
Secure mount using a
washer and hex nut on
underside of stand.
3
Tighten hex head nut.
u
Mounting to Multi-Tier Stand
1
Insert a square nut into
each channel on top of
stand.
2
Place mount over square
nuts in stand.
3
Thread ¾” hex head screws
through washers into
square nuts.
4
Position mount against frame.
5
Insert thread forming hex
head screws through wash-
ers and mount into accessory
holes on conveyor frame and
screw into place.
6
Tighten mount to stand.
