QBD CDxxHC Installation, Operation And Maintenance Manual Download Page 13 | Manualshive

Page: 13 / 31

QBD CDxxHC Installation, Operation And Maintenance Manual Download Page 13

QBD COOLING SYSTEMS INC.

QBD.COM

13

-

Always use QBD supplied OEM parts only. Use of non-OEM
parts will not only void the warranty but may also lead to a fire,
explosion, serious injury or death.

------------------------------------------------------------------------------------------

-

Only trained and certified technician, for Hydrocarbon
systems, should service these coolers.

------------------------------------------------------------------------------------------

-

Use extreme caution and follow all local/regional codes for
transportation or relocation of Hydrocarbon coolers.

10.

ELECTRICAL PARTS FOR HC COOLERS

Always use QBD supplied OEM parts only. Use of non-OEM parts will not only
void the warranty but may also lead to a fire, explosion, serious injury or death.

Below is just to demonstrate some examples of difference in parts used in non R-290 vs
R-290 systems.

CONTROLLER

Please contact QBD Technical support
for more information on controller for your
particular cooler.

ECM MOTORS

UL Approved / Very High
Efficiency / Brushless / Wider
operating range

ELECTRICAL CONNECTORS

USE OEM PARTS ONLY

COMPRESSOR
RELAY/OVERLOAD/
CAPACITOR

USE OEM PARTS ONLY

LED POWER SUPPLY

Approved for Hydrocarbon / Class
2 Type Power supply: 12V DC /
High Energy Efficiency

LED+ Lighting

up-to 50% more product
illumination

«
...
11
12
13
14
15
...
»

Summary of Contents for CDxxHC
































Reviews:

No comments