QALCOMET HEAT 1, User Manual

Page: 34 / 52

Heat meter calculator QALCOMET HEAT 1 PEQMH1V01
34
Table 8 cont.
Symbol on the
upper part of
display (Zone C)
Measurement unit
(parameter symbol)
Zone E
Parameter
code
Zone A
Parameter value
Zone B
1 h 4: Time when flow rate q1 exceeds maximum
allowed value
2 h 4: Time when flow rate q2 exceeds maximum
allowed value
3 h 4: Time when flow rate q3 exceeds maximum
allowed value
4 h 4: Time when flow rate q4 exceeds maximum
allowed value
To move to the next level -
“PRN”
- press and hold button

.
8.5. Printing reports (level 4)
Connect printer to calculator using external communication interface or optical communication
adapter. Printer serial port data transfer rate should be the same as defined in calculator settings. Printer
should be set to condensed printing mode.
For printing report via wire interface
– in configuration parameter “18” – to set value “1”, for
printing via optical interface
– to set value “2” (see page 18)
Fig. 8.6 Connection of printer via optical interface
To enter report printing mode, press and hold button

several times, until label “PRN” is
reached. LCD will display the following:
Select blinking LCD zone (report type, time interval or heating system number) by shortly
pressing button

. Define the following report options by shortly pressing button

:
- report type
Ac
–
printing consolidated report,
Er
–
printing error list,
In
–
printing current values if integral parameters,
CF
–
printing device configuration parameters,
Report type
System number
Time interval