13
M
ic
C
ommander
Reboot
:
Reboot will remotely cause the transmitter to do a power on reset. This returns the transmitter to its last known
state.
Main Menu
:
The main Menu is access
ed by pressing the “BACK” button. From here you can navigate and select other menus,
including the “Transmitters” menu.
ACTIVE TRANSMITTERS LIST
Transmitters – Status and Control
:
Active Transmitters menu will appear when first turned on. A list of all transmitters currently registered with
the MicCommander will be displayed. The transmitter list has seven separate tabs. Tab 1 is displayed initially
and indicated by the black line at the bottom left of the screen. Additional tabs (shown below) are displayed
by pressing the right or left navigation arrows. The RSSI and Link Status Icon are displayed to the left of the
transmitter serial number. When a transmitter is out of range or set to storage mode, data is displayed as series
of question marks. From any of the Active Transmitter display tabs below, the transmitter setup menu can be
accessed by pressing the “Menu” button once the desired transmitter has been highlighted. The Menu button
will bring up a list of 15 items that are required for adding or removing a transmitter from the active transmitter
menu, accessing special features of the selected transmitter, or for sorting the Active Transmitter list.