QT-5000 & Remote Control Audio System
Revision: 6
QT-5000 and RCAS User Manual v6.docx
Page 20 of 30
Q5X Systems, Inc. 2012
Tab 2 – Configuration Tab
Configuration Tab
Tab 2 contains most of the configurable settings of the
transmitter.
To edit any of settings, one must first put the panel into Edit
mode by pressing the Edit button. Once it is in Edit mode, the
button will turn pink.
Each parameter has a “set” button to the right (indicated by a
‘>’). After the desired value is entered, press the “set” button
to send the value to the transmitter.
Frequency
This parameter is the frequency that the audio transmits on.
Range: 600.000 to 700.000 MHz
Step: 25 kHz.
Group
The transmitters can be powered on and off in groups, making it
simpler to control batches of transmitters. A transmitter can be
set to one of 31 groups.
To set the group names, see the section “Customizing Group
Names”.
Mic Gain
If a microphone is clipping, the Mic Gain can attenuate the gain
of the microphone from 0 to -6.5 dB.