© 2020 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | [email protected] | www.q-tran.com
Specification subject to change.
Rev-03-08-21
INSTALLATION
FLEX Light - FLEX Dome
NOTES:
• Field modifications must comply with Q-Tran’s installation methods otherwise warranty is null and void
Clasp End Cap
3. Installation of Tall Plug
4. Push the anti-skidding clip to the end until the two hook splinters on each side pop out to lock the U steel plate. Use the gripper to help tighten the piece.
Please energize the light to check its
functionality and do waterproof
reliablity testing after connector assembly.
Push the bulging points on the anti-skidding
clip into the slots on the U steel plate.
Pull the Gripper. It will push the U Steel
Plate forward until its 2 hook splinters
on either side pop out.
Use the second tap to insert into the slot
Push the bulging points on the anti-skidding
clip into the slots on the U steel plate.
Pull the Gripper. It will push the U Steel
Plate forward until its 2 hook splinters
on either side pop out.
Use the second tap to insert into the slot
