background image

9

 TD-001543-01-A

Specifications

Video I/O

HDMI 2.0 inputs

Three HDMI inputs capable of receiving source input video formats up to 4K60 4:4:4

HDMI 2.0 outputs

Two HDMI outputs capable of scaling and outputting video formats up to 4K60 4:4:4

Scaler

Each HDMI output features a robust, polymorphic 4K60 4:4:4 scaler than can accommodate the most challenging resolution and frame 
rate conversions.

Audio I/O

HDMI inputs

8-channel PCM audio, Q-SYS routable

HDMI outputs

8-channel PCM audio, Q-SYS routable

Analog audio input

Signal-to-noise:
THD+N:
Input frequency response:
Input Impedance (unbalanced):

3.5 mm unbalanced stereo mic/line input Q-SYS routable
80 dB 
0.009% @ 0 dB
20 Hz to 20 kHz +0.05% / -0.5%
5 kΩ nominal Analog to digital converters: 24 bit, 48 kHz

Analog audio output

Signal-to-noise: 
Output frequency response:

3.5 mm unbalanced stereo line output Q-SYS routable
90 dB THD+N: 0.0167% @ 0 dB
20 Hz to 20 kHz +0.2% / -0.5%

Other Connectors

External power supply 

48 VDC Nominal, 1.5 A on 2-pin Euro connector

GPIO

Euro connector for extension of Q-SYS Control to third-party devices, user configurable

LAN A

Gigabit LAN connection for interface with Q-LAN; PoE++ 

PoE++ (Power over Ethernet) 
specification/wattage

Conforms to IEEE 802.3bt Type 4 specification, PD class 8 (71W at PD, 90W at PSE) 

LAN B

No functionality at initial release

RS-232

Three-pin Euro connector for extension of Q-SYS Control to third-party devices, user configurable

USB Type A

USB type A host connectors (blue connector is for USB 3.0 connection).   1.0 A total is available for all four Type-A USBs.

General

Dimensions

8.66 in x 11.28 in x 1.72 in 
220 mm x 286.6 mm x 43.6 mm

Weight

4.0 lb (1.81 kg)

Mounting options

Rack- (1 RU half-rack width), surface-, table-, or wall-mountable.  All mounting hardware is included with the exception of surface-
specific screws and washers.

Regulatory compliance

CE, FCC Part 15 Class B, RoHS

Environmental

Ambient operating temperature range

0-50° C

Humidity

5 to 85% non-condensing

Storage temperature

-20 to 70° C

Specifications are subject to change without notice.

Summary of Contents for NV-32-H











Reviews: