3
TD-001543-01-A
Introduction
The Q-SYS NV-32-H is a network video endpoint native to the Q-SYS Ecosystem, serving as a multi-stream, software-configurable HDMI encoder/
decoder that enables network-based video distribution. Optimized for the meeting room, the Q-SYS NV-32-H delivers the right balance of high
quality (supporting resolutions up to 4K60 4:4:4), low-latency and network-efficient video distribution across a standard gigabit infrastructure.
Powering the Q-SYS NV-32-H
WARNRNG!:
To avoid risk of electric shock, this equipment must only be connected to a supply mains
with protective earth when using class I power supply.
The Q-SYS NV-32-H has a flexible power solution that allows the integrator to choose to use either a 48VDC power supply or a 802.3bt PoE++
injector. Please note that 802.3bt is a high-power over Ethernet standard that allows for up to 71W of power delivered to end-point devices over
standard Ethernet cabling. Equipment meeting the 802.3bt standard is required to power the Q-SYS NV-32-H. The Q-SYS NV-32-H will not work
using PoE or PoE+ (802.3af or 802.3at) equipment.
With either power solution please make sure to follow the safety instructions for the specific power supply or injector chosen. For details on the
48vDC or PoE++ power supply requirements please see the product specifications at the end of this document.
Installation
Ventilation
Minimum open space of 6 inches measured from the back of the
Q-SYS NV-32-H.
RNOT!:
In order to provide adequate dissipation of
heat, keep the space directly to the rear of the
Q-SYS NV-32-H
free of obstacles.
Select the Installation Configuration
Choose one of the following configuration options:
One Q-SYS NV-32-H 19-inch Rack (Left or Right Mount)
One Q-SYS NV-32-H 19-inch Rack (Center Mount)
Two Q-SYS NV-32-H's 19-inch Rack
