48
49
CHAPTER 7 REMOTE SUR
VEILLANCE
PPPOE
If you are going to attach the DVR directly to a DSL or cable modem instead of to a router
then select the PPPOE option in the Network options. Before you proceed, you will need to
contact your ISP to obtain your User Name and Password.
STEP 1.
Select the
Setup
icon in the
Main Menu
(
Red Box in
Picture
7-10
)
STEP 2.
Select the
Network
icon (
Red
box in
Picture
7-11
)
STEP 3.
Check the box next to
PPPoE
Red Box in
Picture 7-12
)
STEP 4.
Enter the User Name and
Password obtained from your ISP in
the fields below
PPPoE
STEP 5.
Click the
Test
button to verify
your settings.
STEP 6.
After receiving the
OK
message
in the lower left of your screen, click
on the
Apply
button to save your
settings before exiting.
PICTURE 7-10
PICTURE 7-11
PICTURE 7-12
7.3 PORT FORWARDING
Port Forwarding allows computers and devices outside of your network to communicate
with the DVR. You will need to forward ports 80 and 6036 from the attached router to the
IP address of the DVR. Your router must be powered up and attached to the DVR before
proceeding.
Things you will need to know :
1. The make and model of the router.
2. If you changed the default router login, then you will need to know the user name and
password for that router.
3. The IP address for the router.
4. You will be forwarding ports
80
and
6036
.
DETERMINING THE IP ADDRESS OF THE DVR
To find out the IP of DVR for QT4 and QT52 series DVRs do the following:
NOTE!
The DVR and PC must be connected to the same router.
STEP 1
. Using the mouse, right-click
anywhere on the screen to bring up
the
Control Bar
. Click on the
Menu
icon on the far left of the bar to open
the
Main Menu
.
STEP 2
. Click on the
Setup
icon (
Red
box in
Picture 7-14
) in the
Main
Menu
.
PICTURE 7-13
PICTURE 7-14
