English
59
P/T Function Setting
●
Run Patrol 1:
Remarks
：
All the Patrol running methods are the same, here we take “Run Patrol 1” as
an example to make illustration.
)
Operating method as follows:
1
、
Move the cursor to choose
【
Patrol
】
in the
【
Pan
】
.
Press
【
OPEN
】
key (open iris order) for confirmation, enter into “Setup Patrol
Menu”.
2
、
Move the cursor to choose
【
Run Patrol 1
】
in the
【
Patrol
】
.
Press
【
OPEN
】
key (open the irisorder) to confirm starting running
Patrol 1,at the same time , the dome will exit the main menu and
run Patrol 1 , the corresponding preset No.
“
Go to preset
﹡﹡
﹡”
will display on the left-upward of the monitor screen.
3
、
In running patrols, the dome will stop the present scan upon receipt
of any effective order.
Remarks
：
All the Patrol running methodsare the same, if
you want to rerun a new patrol, just repeat the
above steps.
P/T Function Setting
Preset setting Menu
Preset Running Situation
Setup Patrol 1
On
Setup Patrol 2 Off
Setup Patrol 3 Off
↓
Run Patrol 1
Run Patrol 2
Run Patrol 3
Go to preset
﹡﹡﹡
Preset No. Arrangement
Pattern
▽
↓
Patrol
▽
Scan
▽
Home place
Auto flip On
Tilt Max speed 110
Pan Max speed 120
Preset speed 124
